that I see no other option than taking a scope and start searching, or maybe someone else here has encoutered this problem.
From: Vincenzo Mone
Sent: Tuesday, July 16, 2013 3:08 PM
To: ts790-***@public.gmane.org
Subject: R: R: R: [ts790] ALC
Mark,
on the ACC port I have a TNC connection and have pulled it out having the same result.
Also have tried with another mic an Kenwood MC-85 also with the same result.
Thanks
73's de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
**********************************
******* GSM +39 328 7110193 *******
****** SMS +39 328 7110193 ******
*** 2nd e-mail: vimone-nc/***@public.gmane.org ***
*********************************
Da: ts790-***@public.gmane.org [mailto:ts790-***@public.gmane.org] Per conto di pe3hmp
Inviato: martedì 16 luglio 2013 15:03
A: ts790-***@public.gmane.org
Oggetto: Re: R: R: [ts790] ALC
oops sry my mistake, the ts790 does not have a send button, stupid I should have remembered that because I made a switch pannel for it 15 years ago.
do you have annyting in the acc ports on the back of the ts790 ? and do you have another mic
From: Vincenzo Mone
Sent: Tuesday, July 16, 2013 1:28 PM
To: ts790-***@public.gmane.org
Subject: R: R: [ts790] ALC
Excuse me Mark if I disconnect the mi chow can I try?
73's de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
**********************************
******* GSM +39 328 7110193 *******
****** SMS +39 328 7110193 ******
*** 2nd e-mail: vimone-nc/***@public.gmane.org ***
*********************************
Da: ts790-***@public.gmane.org [mailto:ts790-***@public.gmane.org] Per conto di pe3hmp
Inviato: martedì 16 luglio 2013 13:24
A: ts790-***@public.gmane.org
Oggetto: Re: R: [ts790] ALC
not sure, first disconnect mircrophone and/or acc connectors and see if the problem still is there
From: Vincenzo Mone
Sent: Tuesday, July 16, 2013 1:13 PM
To: ts790-***@public.gmane.org
Subject: R: [ts790] ALC
Mark,
Thanks.
Which kind of problem and how to solve it?
73's de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
**********************************
******* GSM +39 328 7110193 *******
****** SMS +39 328 7110193 ******
*** 2nd e-mail: vimone-nc/***@public.gmane.org ***
*********************************
Da: ts790-***@public.gmane.org [mailto:ts790-***@public.gmane.org] Per conto di pe3hmp
Inviato: martedì 16 luglio 2013 12:54
A: ts790-***@public.gmane.org
Oggetto: Re: [ts790] ALC
There is a problem, it shows that there is some serious kind of signal being send and you should also have power outputt.
Mark
From: Vincenzo Mone
Sent: Tuesday, July 16, 2013 12:08 PM
To: ts790-***@public.gmane.org
Subject: [ts790] ALC
Hi to the list,
This morning I have noticed a strange issue on my TS-70oE that I do not know
If is normal or not.
While in SSB if I active the ALC button ( PRESSED IN ) and TX I noticed that
the
s-meter needle slams to the right side of the s-meter.
Is that normal or there is a problem in my TS-790E?
Thanks in advance.
73's de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
**********************************
******* GSM +39 328 7110193 *******
****** SMS +39 328 7110193 ******
*** 2nd e-mail: mailto:vimone%40tin.it ***
*********************************